• Specification Drawings

Choose from the options below to download specification drawings.









FORMAT:       

G Series

For on-the-floor or partially recessed installation

G-Series
Model Intermittent
Flow GPM
Tapped
Inlet and
Outlet
(in.)
Static
Holding
Capacity
(gal.)
Greasy
Sludge
Capacity
(lb.)
Bottom to Center Width
D (in.)
Length
E (in.)
Height
F (in.)
Overall Length
(M unit only)
G (in.)
Shipping
Weight
(lb.)
of Inlet
B (in.)
of Outlet
C (in.)
G-710 5 1.5 1.7 9 5.5 7.5 6.75 9.75 9 28
G-1012 8 1.5* 3.5 18 7.63 9.63 8.75 10.75 11.5 16.75 42
G-1412 12 2 5.3 27 8.38 10.75 10.75 13.25 12.88 18.38 58
G-1815 16 2 10 50 11 13.75 10.75 19 15.88 24 80
G-1820 20 2 17 86 12 15 14.75 20.75 17.88 25.75 106
G-2420 30 3* 31 156 14.5 17.88 18.75 25 20.63 32 165
G-2635 35 3 40 202 16.5 21 18.75 25 25.13 32 181
G-2824 40 4 54 272 21.5 25.75 20.75 26.75 29.38 36 248
G-3050 50 4 60 302 21.5 25.75 20.75 30 29.88 39 295
G-3224 60 4 67 338 21.5 25.75 20.75 33.5 29.38 40 318
G-3475 75 4 80 403 22 26.25 23.25 33.5 30.5 42 343
G-3628 100 4 110 554 22 26.25 30.5 36 30.13 45 418
G-23-LO 16 2 10 50 6 8.75 14.75 20.75 10.63 25.75 80
G-25-LO 20 2 21 106 6.5 10.25 20.75 26.75 13.63 36 127
G-30-LO 30 3* 23 116 6.5 10.25 20.75 30.75 13.63 37.75 163
G-36-LO 35 3* 28 141 6.5 10.25 20.75 36.75 13.63 43.75 170
G-45-LO 40 3* 37 186 6.75 11 20.75 45 16 52 257
G-50-LO 50 3* 41 207 6.75 11 20.75 50 16 57 258

* Also available with 2” inlet and outlet.
• Separators with filter medium can be furnished.
• Stainless steel also available.
• Draw-off valve available.
• Allow headroom for lifting out both screens to clean the separator.

Job Specification: Grease separators shall be Rockford Separators as manufactured by Rockford SanitarySystems, Inc., Rockford, Illinois, and as noted on plans.

Separator Specifications: Furnish ______Rockford Model G-______ all-welded steel separators for on-the-floor (or partially recessed) installation, ______ g.p.m. intermittent flow, ______" tapped inletand outlet with outlet vent connection, ______ lb. greasy sludge capacity, visible double-wall outside trapseal, non-removable separator screen with easily removable filter screen, gasketed cover hand-tightened tobody with safety-catch bolt assemblies, enamel coating inside and outside.

Optional Features: Epoxy coating inside and outside. Sediment basket. Filter medium. All stainless steel construction.

 

G-C Series

Cabinet Grease Separators

Designed to fit into the small space of complete kitchen units, including compact sink-range-refrigerator combinations.

G-C-Series
G-100-C G-200-C

No outlet fittings furnished.
Tapped outlet opening is on wall
directly opposite inlet openings.

G-300-C


Model Intermittent
Flow GPM
Tapped
Inlet and
Outlet
(in.)
Static
Holding
Capacity
(gal.)
Greasy
Sludge
Capacity
(lb.)
Bottom to Center Width
D (in.)
Length
E (in.)
Height
F (in.)
Side to
Inlet
G (in.)
Inlet to
Outlet
H (in.)
Side to
Outlet
I (in.)
Shipping
Weight
(lb.)
of Inlet
B (in.)
of Outlet
C (in.)
G-100-C 4 1.5 1.7 7 5.5 7.5 13 9.75 9 1.5 2.88 4.63 28
G-200-C 4 1.5 1.7 7 3 5.5 6.75 9.75 9 4.63 4.63 24
G-300-C 4 1.5 1.7 7 5.5 7.5 13 9.75 9 1.5 2.88 4.63 28

Job Specification: Grease separators shall be Rockford Separators as manufactured by Rockford Sanitary Systems, Inc., Rockford, Illinois, and as noted on plans.

Separator Specifications: Furnish ______Rockford Model G-______-C all-welded steel separators for inside cabinet installation, 4 g.p.m. intermittent flow, 1-1/2" tapped inlet and outlet, 6lb. greasy sludge capacity, visible double-wall outside trap seal, easily removable separator screen and filter screen, gasketed cover hand-tightened to body with safety-catch bolt assemblies, enamel coating inside and outside.

Optional Features: Epoxy coated. All stainless steel.

Necessary Clearances

Model Clearance Needed to Remove Screens for Cleaning Bottom of Unit to
Center of Outlet (in.)
M (in.) L (Left Hand) (in.) R (Right Hand) (in.)
G-100-C N/A 5 7.5
G-200-C 7 5.5
G-300-C N/A 5 7.5
G-710 7 5 5 7.5
G-1012 10 6.5 6.5 9.63
G-1412 12 8.25 8.25 10.75
G-1815 8.25 8.25 8.25 13.75
G-1820 7 7 7 15
G-2420 11.5 11.5 11.5 17.88
G-2635 11.5 11.5 11.5 21
G-2824 14 14 14 25.75
G-3050 14 14 14 25.75
G-3224 14 14 14 25.75
G-3475 14 14 14 26.25
G-3628 14 14 14 26.25
G-23-LO 7 7 7 8.75
G-25-LO 9 9 9 10.25
G-30-LO 9 9 9 10.25
G-36-LO 9 9 9 10.25
G-45-LO 9 9 9 11
G-50-LO 9 9 9 11

Clearance on M style units can be reduced by ordering specially fabricated screens P.O.A.