Drains shall be Rockford Trench Drains, as manufactured by Rockford Separators, Inc., Rockford, Illinois, and as noted on plans.
Furnish ______Rockford Model RTD-______ Trench Drains of all-welded 1/8" carbon steel. Body to be of one-piece construction ______' ______" long with ______" (specify 2", 3", or 4" tapped or spigot) outlet connection with loose-set gravel strainer. Easily removable, 2-foot sectional cover grates made of Cor-Ten® steel with 3/8" X 3" slots. Anchor flange. OPEX® Shop Coat coating inside, bituminous coating outside.
Sanitary stainless steel body, stainless steel grates, additional outlets, diamond treadplate, 1/4" or 3/8" circular openings in grate, tamper-proof grates, flashing clamping ring.
These are medium-duty trench drains.
Specify outlets required, length of run, trench size.
Interior or exterior medium-duty off-the-floor drainage for use in:
- auto service stations
- building entrances
- driveway ramps
- dry cleaning plants
- exhibition halls
- industrial floor drainage
- institutional kitchens
- loading docks
- packing houses
- other installations requiring perimeter drainage
End view of drain body at outlet.
Note gravel strainer over outlet opening. Tapped outlet connection illustrated.
Side view of drain body.
roken lines indicate position of spigot outlet, either straight or 90° elbow. Bottom of drain pitches 1/4" per foot toward outlet. One outlet every 12 feet is standard.
Specify type and pattern of cover grates and desired outlet. Also specify number of outlets required.
*Any combination of these patterns may be ordered in a single drain.
|Model||Tapped or Spigot Outlet (in.)||A Length (ft.)||B Depth (in.)||Depth C (in.)||D (in.)||E (in.)||F (in.)||Length per Section||Pattern*||Weight (lb.)|
|RTD-10||2", 3" or 4"||Customer Specification||5||Dimension "B" plus 1/4" per ft. of Dimension "A"||6.5" on 90° elbow spigot||5.5" on short spigot; 11.5" on long spigot||7.75||2'0"||3/8" x 3" slots, or 3/8" and larger circular openings, or nonskid diamond pattern treadplate||Varies from 25 to 40lb. per ft. depending on length of drain and type of grates|
|RTD-20||2", 3" or 4"||Customer Specification||5||Dimension "B" plus 1/4" per ft. of Dimension "A"||6.5" on 90° elbow spigot||5.5" on short spigot; 11.5" on long spigot||12.5||2'0"||3/8" x 3" slots, or 3/8" and larger circular openings, or nonskid diamond pattern treadplate||Varies from 25 to 40lb. per ft. depending on length of drain and type of grates|