Oil separators shall be Rockford Separators as manufactured by Rockford Separators, Inc., Rockford, Illinois, and as noted on plans.
Furnish ____Rockford Model OSL-____all-welded ____ 10 gauge steel separators, ____g.p.m. intermittent flow, ____” (tapped) (hubbed) inlet and outlet, ____” tapped internal vent connection, ____” tapped oil draw-off connection for adjustable oil draw-off, visible double-wall outside trap seal, non-removable separator screen with easily removable filter screen, removable 3/16″ nonskid diamond treadplate cover(s) for flush-with-floor installation for pedestrian traffic, or reinforced for ____(light)(heavy) traffic, cover(s) secured with stainless steel flat head screws, extra-heavy leakproof gasket. OPEX® Shop Coat coating (resistant to oil, grease and cutting oils) inside and bituminous coating outside.
Anchor flange, filter media, sediment basket, integral extension, epoxy coating, anodes, coalescing pack. Double-wall construction.
This is a lighter gauge oil separator
Recommended Top Access to be able to observe and clean the entire fluid surface in all chambers down to the bottom of the unit.
Call for specifications.
LARGER UNITS AVAILABLE
* Anchor flange requires 3″ extension.
• 6″ & larger – companion flange connection.